» Articles in this category:

	How do I hook up a loader to my Yanmar tractor Check out this article- http://www.hoyetractor.com/loaderinstall.htm How Do I add remote hydraulics to my Yanmar tractor? read this -- http://www.hoyetractor.com/remote.htm What is the difference between a finish & rough cut mower? Finish Mower: several small & fast spinning blades very fine cut - similar to a push mower very even cut because it has wheels on each corner fairly fragile - not good for areas with possible debr... What size mower should I get? What Size Mower Do I Need? There are really 3 things that you need to consider when shopping for a mower. 1- Finish mower or rough cut (brush) mower. A finish mower will leave a nice smooth cu... I want to dig a pond in my yard. Will a front loader work? Short answer... no. Long answer- Front loaders are really intended to pick up loose stuff - sand from a pile, rock from a pile, move around firewood, etc. They are not designed to actually dig int... How many horsepower do I need? There is a general rule of thumb that you need 4 horsepower for every 1 foot of implement. If you have a 20hp tractor you will want to start looking at around a 5' blade, mower, etc. This applies ...

What is the difference between a finish & rough cut mower? 137

What size mower should I get? 96

How Do I add remote hydraulics to my Yanmar tractor? 74

I want to dig a pond in my yard. Will a front loader work? 64

How do I hook up a loader to my Yanmar tractor 41

How many horsepower do I need? 41

How many horsepower do I need? 2010-05-06 15:12:32

I want to dig a pond in my yard. Will a front loader work? 2010-05-06 15:10:12

What size mower should I get? 2010-05-06 15:04:48

What is the difference between a finish & rough cut mower? 2010-05-06 15:02:56

How Do I add remote hydraulics to my Yanmar tractor? 2010-05-06 14:54:23

How do I hook up a loader to my Yanmar tractor 2010-05-06 14:53:37

Powered by Help Desk Software HESK™