WAC 60 Finish Mower

The WAC finish mower stands as a premier solution for achieving professional-grade, manicured lawns. With its impressive 60-inch cutting width and specialized blade system, this implement transforms ordinary grass into picture-perfect turf. Whether you’re maintaining a sprawling estate, a commercial property, or simply desire golf-course quality results for your home, the WAC 60 finish mower delivers unparalleled performance and precision cutting.

Key Features and Specifications

Cutting System

Cutting Width: 60 inches (5 feet)
Blade Configuration: Three 20-inch precision blades
Cutting Capacity: Handles grass up to 12 inches tall
Maximum Cutting Speed: 5 MPH

Blade Specifications

Length: 20 inches (508mm)
Width: 2-5/16 inches
Thickness: .240 inches (6.096mm)
Center Mounting Hole: 3/4 inches (19.05mm)
Lift: Approximately 1-5/32 inches (28mm)

Why Choose a WAC Finish Mower?

Performance Advantages

The WAC finish mower offers significant advantages over alternative mowing equipment:

Superior Cut Quality: Creates a manicured, professional lawn appearance that brush hogs simply cannot match
Width Efficiency: At 60 inches wide, it’s typically 25% wider than standard brush hogs (48 inches), allowing you to complete mowing tasks faster
Versatile Operation: Can handle grass up to 12 inches tall, though optimal performance is achieved at moderate heights

⚠️ Application Note: Unlike brush hogs or flail mowers, finish mowers are specifically designed for maintained grass areas and not for cutting woody stems or thick vegetation.

Proper Setup and Operation

Tractor Requirements

PTO Speed: Always operate at 540 RPM tractor PTO speed
Tractor Type: Best suited for tractors with wide front axles
Power Limitations: Not recommended for tractors exceeding 40 horsepower
Weight Distribution: A minimum 20% of total weight must be on the tractor’s front wheels for stability and safety

Pre-Operation Checklist

1 Verify all shields and guards are properly installed

2 Check cutting height and front-to-rear attitude

3 Inspect the cutting area and remove any debris

4 Ensure PTO driveline shields are secure

Advanced Cutting Techniques

Achieving Professional Results

Double Cutting Method

For truly professional results, consider mowing your area twice. Make the second cut perpendicular (at a 90-degree angle) to the first pass. This technique significantly improves the lawn’s appearance and evenness.

Mulching Adjustment

Create a natural mulching effect by adjusting the rear height crank handle to 0.25″-0.5″ below the front of the deck. This allows grass blades to be cut twice, resulting in finer clippings that decompose faster and provide nutrients to your lawn.

Tall Grass Technique

When tackling taller grass (up to 12 inches), raise the rear height crank handles 0.5″-0.75″ above the front handles. This adjustment improves cutting efficiency and reduces strain on the mower when dealing with challenging conditions.

Essential Maintenance and Care

Regular Maintenance

Blade Maintenance: Keep blades sharp, free of nicks and cracks, and securely fastened
Hardware Inspection: Regularly tighten all bolts, nuts, and screws
Safety Checks: Verify that all cotter pins are properly installed
Quality Replacements: When replacement is necessary, use genuine factory parts or high-quality alternatives

Blade Replacement

For optimal performance, consider high-quality replacement blades made of Boron Steel (often manufactured in Italy). These premium blades offer extended service life and maintain a superior cutting edge.

“Regular maintenance is not just about keeping your equipment running—it’s about ensuring the quality of your lawn. A well-maintained WAC finish mower will provide years of reliable service and consistently beautiful results.”

Troubleshooting Common Issues

Problem-Solving Guide

Uneven Cutting

Ensure side crank-handles are adjusted to equal heights
Check tire air pressure and adjust if necessary
Examine blades for damage or excessive wear
Verify the deck is level from side to side

Engine Performance Issues

Inspect the throttle adjuster for proper function
Check the fuel system for contamination
Replace fuel and clean the fuel filter and lines if necessary
Ensure the PTO is operating at the correct 540 RPM speed

Frequently Asked Questions

What makes a finish mower different from a brush hog?

A finish mower is designed to create a manicured lawn appearance with a cleaner cut, while a brush hog is built for rougher cutting of thicker vegetation. WAC finish mowers are typically 25% wider than brush hogs of comparable class, allowing for faster job completion, but they cannot handle woody stems or thick material that brush hogs can manage.

What tractor size is recommended for a WAC 60″ finish mower?

The WAC 60″ finish mower is designed for tractors with Category I, 3-point hitch and 540 RPM PTO. It’s not recommended for tractors over 40 horsepower, and tractors with wide front axles are preferred for stability.

How do I maintain the blades on my WAC finish mower?

Regularly inspect blades to ensure they are sharp, free of nicks and cracks, and securely fastened. Replace with high-quality blades when necessary, such as those made from Boron Steel. Proper blade maintenance is essential for optimal cutting performance.

What is the recommended cutting technique for the best lawn appearance?

For a manicured lawn appearance, consider mowing the area twice with the second cut at 90 degrees to the first when possible. For a mulching effect, lower the rear height crank handle to 0.25″-0.5″ below the front of deck, which allows grass blades to be cut twice.

Conclusion: Why the WAC 60 Finish Mower Stands Out

The WAC 60 finish mower represents the pinnacle of precision lawn care equipment. With its impressive 60-inch cutting width, triple-blade design, and ability to create a professionally manicured appearance, it’s the ideal choice for property owners and landscapers who demand the highest quality results.

The versatility of this finish mower allows it to handle various grass heights, while its specialized design ensures a clean, even cut across your entire lawn. When properly maintained and operated, the WAC finish mower will provide years of reliable service and consistently beautiful results.

Whether you’re maintaining a large residential property, a commercial space, or any area where appearance matters, the WAC 60 finish mower delivers the performance, efficiency, and quality you need to achieve that perfect, professional finish.

Last Updated: March 19, 2025

Check us out for more at Softwarestudylab.com