Tractor Oil Filter Cross-Reference: Verified Kubota Matches

tractor oil filter cross reference

Thank you for reading this post, don't forget to subscribe!
Quick Answer

Kubota uses different oil filters on different tractors, and the aftermarket match depends on the Kubota number. The only brand that publishes Kubota-number matches we could verify is WIX: 51365 for HH150-32430, 51064 or 51334 for HH150-32094, WL7135 for HH1C0-32430, and 51601 or 51714 for HH1G0-32430. We found no manufacturer cross for HH164-32430 (L series) or HH1J0-32430. The WIX, NAPA, FRAM and Baldwin filters often sold as one “identical” set have different published heights and gasket sizes, so they are not interchangeable by default.

Orange part numbers are Amazon affiliate links (we may earn a commission at no cost to you). Check that the listing title shows your exact part number before you buy.

Kubota Oil Filter Numbers by Model, With Verified WIX Matches
Kubota number Fits (per dealer catalogs) Verified WIX match Dealer price (checked Oct 19, 2026)
HH150-32430 BX1880, BX2380, BX23S (earlier serials). Replaced by HH1J0-32430. WIX 51365 No longer sold at Messick’s; replaced by HH1J0-32432
HH1J0-32430 BX1880, BX2380 (later serials). Dealer pages now show HH1J0-32432 as the newest replacement. Not found Not checked
HH150-32094 B2301, B2601, B2650, BX2680 WIX 51064 or WIX 51334 $14.88 to $16.23
HH164-32430 L2501, L3301, L3901 (HST), L4701, L5740 (HST) Not found $15.74 to $16.84
HH1C0-32430 M5040, M6040, M7040, M5-111, M6060 WIX WL7135 (chassis-number qualifier on the M6040 application) $20.37 to $25.77
HH1G0-32430 M6-141 (V6108-TIEF4 engine) WIX 51601 or WIX 51714 Not checked

Fitment comes from Messick’s and Coleman Equipment dealer catalogs. The M7060 oil filter is not confirmed in our latest check. WIX lists more than one filter for some Kubota numbers, qualified by application, so confirm yours against the application notes on the WIX listing.

HH150-32430 and HH150-32094 Are Different Filters

Older versions of this page showed WIX 51365 for every Kubota compact tractor. Dealer catalogs list HH150-32430 at 0.40 lb and HH150-32094 at 0.70 lb, and WIX lists separate filters for each. Do not put a 51365 on a B2601, B2650, B2301 or BX2680 unless your dealer or the filter maker confirms it for that tractor.

Published Specs We Could Verify

These numbers come from each manufacturer’s own listing. “Not found” means the source did not give that value, not that the filter lacks it.

Filter Thread Gasket OD Height Bypass Notes
WIX 51365 M20 × 1.5 2.475 in 2.513 in 8 to 11 psi Nominal 21 micron
WIX 51064 M20 × 1.5 2.475 in 75.9 mm Not found Kubota HH150-32094
WIX 51334 M20 × 1.5 2.475 in 3.238 in (82.2 mm) Not found Kubota HH150-32094
WIX WL7135 3/4-16 UNF Not found 90 mm Not found Kubota HH1C0-32430. Different thread from the filters above.
NAPA Gold 1365 M20-1.5 Not found 2.58 in Not found No Kubota number found on NAPA’s listing
FRAM PH6607 M20 × 1.5 2.531 in 2.625 in 13 psi No Kubota number found on FRAM’s listing
Baldwin B1400 M20 × 1.5 Not found 2 5/8 in (66.7 mm) Not found No Kubota number found
Donaldson P502067 Not found Not found Not found Not found 50% at 20 micron, 99% at 40 micron (JIS D 1611). A Donaldson sheet lists WIX 51365 as an equivalent.
Why We No Longer Call These “Identical”

WIX 51365, NAPA 1365 and FRAM PH6607 share a thread, but their published heights differ (2.513, 2.58 and 2.625 in), and WIX and FRAM list different gasket sizes and bypass settings. A shared thread does not make filters identical. We also could not verify that NAPA Gold 1365 is made by WIX today, that Baldwin supplies Kubota, or any Donaldson service interval. We have left all three claims off this page.

What These Filters Cost

Kubota dealer prices on Oct 19, 2026 were about $15 to $17 for HH150-32094 and HH164-32430 and $20 to $26 for HH1C0-32430. Amazon prices for the same Kubota numbers vary widely by seller and pack size, so we do not quote a savings figure. Compare the unit price and make sure the listing shows your exact part number.

Where to Buy
Genuine Kubota Oil Filters
Match the number in the listing title to your tractor in the table above.
HH150-32430 (BX1880, BX2380, BX23S)
Earlier BX oil filter.

Check Price on Amazon

HH1J0-32430 (BX1880, BX2380)
Later BX oil filter.

Check Price on Amazon

HH150-32094 (B2301, B2601, B2650, BX2680)
B-series and BX2680 oil filter.

Check Price on Amazon

HH164-32430 (L series)
L2501, L3301, L3901, L4701, L5740 HST.

Check Price on Amazon

HH1C0-32430 (M series)
M5040, M6040, M7040, M5-111, M6060.

Check Price on Amazon

WIX Matches Published by WIX
Each listing is qualified by application, so check the listing against your tractor.
WIX 51365
For Kubota HH150-32430.

Check Price on Amazon

WIX 51064
For Kubota HH150-32094.

Check Price on Amazon

WIX 51334
For Kubota HH150-32094. Taller than the 51064.

Check Price on Amazon

WIX 51601
For Kubota HH1G0-32430 (M7 application).

Check Price on Amazon

WIX 51714
For Kubota HH1G0-32430.

Check Price on Amazon

Changing the Oil Filter: The Basics
  • Warm the engine briefly, shut it off and park on level ground.
  • Drain the oil. Inspect the drain plug threads and washer.
  • Remove the old filter and make sure the old gasket came off with it. A leftover gasket causes leaks.
  • Wipe the mounting base, then put a thin film of clean oil on the new filter gasket.
  • Tighten as the instructions printed on the filter say. Do not use a wrench for final tightening.
  • Refill to the full mark, run the engine for a minute or two, shut it off, recheck the level and look for leaks at the filter base.
  • Take the old oil and filter to a recycling point. Many auto parts stores take used oil, so check locally.

Change intervals vary by model. See our Kubota Oil Change Interval Guide and 50-Hour Service Guide, and your operator’s manual.

What We Could Not Verify
  • Any manufacturer cross for Kubota HH164-32430 (L series) or HH1J0-32430.
  • Any Baldwin, NAPA, FRAM or Donaldson cross that names a Kubota oil filter number.
  • That NAPA Gold 1365 is made by WIX today, or identical to WIX 51365.
  • That Baldwin is an OEM supplier to Kubota, and any Donaldson P502067 service interval.
  • Gasket OD and bypass setting for Baldwin B1400, NAPA 1365, WIX WL7135 and WIX 51064/51334 (partly not found).
  • Thread size and height differences between HH150-32430 and HH150-32094 from a dealer source.
  • Oil filters for John Deere, New Holland, Mahindra and Kioti tractors. We removed those sections until we can verify them.
How We Verified This Page

Kubota numbers and fitment come from Messick’s and Coleman Equipment dealer catalogs. Cross-references and specs come from WIX, NAPA, FRAM, Baldwin and Donaldson listings. Prices were checked Oct 19, 2026 and change often. Where a source gave no value we say “not found.” Confirm with your Kubota dealer using your serial number before ordering.

❓Frequently Asked Questions
QWhat WIX filter replaces the Kubota HH150-32094?

WIX lists both 51064 and 51334 for HH150-32094, with application qualifications. They have the same thread and gasket OD but different heights (75.9 mm and 82.2 mm), so check your old filter against the listing.

QIs WIX 51365 the same as NAPA Gold 1365 and FRAM PH6607?

Not by their published specs. Their heights differ (2.513, 2.58 and 2.625 in), and WIX and FRAM list different gasket sizes and bypass settings. They share an M20 thread, but we do not call them identical.

QDoes an aftermarket oil filter void my Kubota warranty?

We are not lawyers. Read the warranty in your owner’s paperwork and ask your dealer. Whatever you choose, keep receipts and service records.

QCan I use a car oil filter on my Kubota tractor?

Only if the thread, gasket and size match your tractor’s filter, and a manufacturer lists it for your Kubota number. We found no manufacturer cross for several Kubota numbers, so do not guess from the engine size.

QWhat oil filter does a Kubota L3901 use?

Dealer catalogs list HH164-32430 for the L3901 HST, along with the L2501, L3301 and L4701. We found no manufacturer cross for that number, so we list the genuine Kubota filter only.

QHow often should I change the oil filter?

At every oil change. Follow the interval in your operator’s manual and see our Kubota Oil Change Interval Guide.

Related Guides
Oil, HST and hydraulic filter numbers
Hydraulic filter numbers
Small-engine oil filters
Break-in oil and filter change
Model-specific schedules

🔧 Prefer shopping at NAPA? Find filters, fluids and maintenance parts — Shop NAPA Auto Parts

🚜 Coming up on 100 hours? See our complete Kubota L2501/L3301 100-Hour Service Guide — hydraulic filter replacement, suction screen cleaning and a DIY checklist.

🚜 Own an L2501 or L2502? See our L2501 vs L2502 Comparison Guide — what changed between the two, and whether L2501 maintenance content applies to your L2502.

🔧 Own a Kubota ZD zero-turn? See our Kubota ZD Blade Cross-Reference Guide — verified OEM part number, genuine Oregon cross-reference, torque specs and troubleshooting.

🔧 Need the right filter? Use our Kubota Filter Cross-Reference Chart to find the verified oil, HST and hydraulic filter numbers for your model, with supersessions and aftermarket matches.

Affiliate Disclosure: This page contains affiliate links. As an Amazon Associate we earn from qualifying purchases, at no extra cost to you.

2 thoughts on “Tractor Oil Filter Cross-Reference: Verified Kubota Matches”

Leave a Reply

Your email address will not be published. Required fields are marked *

Browse Guides by Category

🔧 Maintenance & Service
⚠️ Troubleshooting
💧 Hydraulic Systems
⚡ Electrical & Starting
🔩 Engine & Fuel
⚙️ Transmission & Clutch
🚜 Attachments
📋 Parts & Specs
🦺 Safety
❄️ Seasonal

View All Guides | About Us

© 2025 Tractor Parts Central. All rights reserved.

The information on this site is for general purposes only. We are not affiliated with tractor manufacturers like Kubota or John Deere. Always consult official manuals for repairs. Product links may earn us commissions.